Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Echoplex memory



It works with parity or non-parity simms, and it doesn't matter if you mix
them or max the memory or whatever. (the parity bit is ignored.) That's in
the echoplex FAQ on the LD website. The problems a few people had seemed to
be from some bad batch of simms, and nobody has reported anything like it
since. In general it's always worked fine with any type simm out there, and
there isn't any known problem with fully loaded memory. I've heard that
reported a couple times and it always turned out to be something else. 
(like
a bad simm...)

kim


At 07:57 PM 8/6/98 -0400, Claude Lassonde wrote:
>Somebody in the list made some comments about having problem with Echoplex
>fully loaded in memory. Parity or non-parity chips where the issue.
>
>What are the SIMMs good for the Echoplex. Company claims that both are
>accepted but it seems that problem may be notice when using one or the
>other...
>
>Tried to look in archive but they stop at #30.
>
>Regards.
>
>_______________________
>Claude Lassonde
>2325, Keller
>Saint-Laurent (Quebec)
>Canada H4K 2G2
>Tel : (514)332-0258
>Email : classonde@psbgm.qc.ca
>Web : http://members.tripod.com/~Lassonde
>
>
>
________________________________________________________
Kim Flint, MTS                 408-752-9284
Chromatic Research             kflint@chromatic.com
http://www.chromatic.com