Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP Feature Idea



Hi David-

that's not a software thing. It's caused by dc offsets in the analog part 
of
the circuit. (specifically, the VCA, for those interested).  There's a
trimpot on the circuit board that trims the offset away, so you don't get
pops. Sounds like this trimpot is not set right on your unit, or things 
have
drifted with age and it needs to be reset. You should be able to set it
yourself. There's a test routine built in the software to help out.  Send 
me
mail at my home address (kflint@annihilist.com) to remind me, and I'll send
you directions on how to do that later. 

probably belongs in the FAQ, right?

kim

At 01:10 PM 3/18/99 -0500, you wrote:
>Kim & EDP Loopologists -
>
>I have an idea for the next EDP software upgrade. It has to do with live
>performance and silently ending / killing an old loop.
>
>The "problem" I'm aiming to "solve" is the deep "PUMB" sound the EDP puts
>out when I press and hold RECORD button to kill an old loop.
>
>Normally I decrease the FEEDBACK on my loops until they are silent -- or
>rather, the loop has no signal left in it.  Then, to start a new loop I'll
>press and hold the RECORD button to clear the "old loop length" from 
>memory.
>
>It's as the the EDP clears that it emits the deep "pumb" sound.  It's not
>much of a bother, but through a big PA it can be very loud.  
>
>Is there a way to silence the EDP so it doesn't make that noise?
>
>David Kirkdorffer
>UNDO
>
>
>
>
_________________________________________________________
Kim Flint, MTS                     kflint@atitech.com
ATI Research                       408-752-9284