Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Boomerang vs. Repeater



the roller is a designated volume controller.
i did not address that before.

jimmy george
http://www.jimmygeorgearts.com



----- Original Message -----
From: Jimmy George <jimmyg@jimmygeorgearts.com>
To: Michael P. Hughes, PhD <m.hughes@surrey.ac.uk>;
<Loopers-Delight@loopers-delight.com>; stofft <stofft@austin.rr.com>
Sent: Monday, February 26, 2001 6:04 AM
Subject: Re: Boomerang vs. Repeater


>
> > Re the Rang 2nd Editon:
> > If you have a loop running, is it possible to tap a shopter tempo,
> > "capturing" a peice of a longer loop?
>
> nope. not unless you have another rang, or a dl4 etc. next to the v2.
>
>  Similarly, can a longer time be
> > tapped in, capturing multiples of the original loop?
>
> nope again.
>
>  Also, am I right in
> > thinking the roller allows the user to change the feedback level, from
> > 0-100%?
>
> nope. the roller does have a wet/dry mix function in the tap echo mode. 
>my
> friend bruce, who i've added into the note, has suggested that mike add
> perhaps another roller for this function or the option of an expression
> pedal. the manual option to change the rates is nicer than the old rang
but
> a roller to effect this parameter would be real sweet.
>
> bruce stofft i believe i've added you onto this note with.
>
> the v2 is not a cut and paste sampler. the v2 has two independent loops
that
> can be recorded and layered upon. it is a very intuitive tool. the v2
> upgrade fixed the low sample rate problem. now at 24 the rang compares to
> the edp, repeater and the dl4.
>
> there is more diversity in your set up options with the v2 when targeting
> certain buttons that have multi function capabilities. for example your
dual
> looping capabilities come from the once/ab button. in one programming 
>mode
> the button acts as a play loop once and stop button. in the ab mode you
have
> the option of the dual loop and even an option that will automatically
play
> the b loop once then jump back into the a mode. as opposed to switching 
>to
b
> and having it infinite repeat until you hit your loop a button again.
>
> you have feedback options at 1, 4, 6, 9, 12, over 20 and infinite (you
> cannot change these rates on the fly. you must stop and enter the options
> mode.). you can also set the half speed mode to hit a number of pitches,
> down a 2nd, 4th, 5th, 7th and a whole octave. (i mainly use the whole
octave
> mode.) ( unlike the dl4 you cannot enter half speed mode when in play
mode.
> you must stop hit half speed then start play again.)
>
> if the manual for the v2 is listed on loopers delight it will explain
easily
> all the v2 functions. you can also email mike nelson direct at
> mnelson@boomerangmusic.com . he normally monitors this list but has had 
>to
> take some time off for personal reasons. he does not like "which looper
> should i buy?" questions though. fyi.
>
> the rang is not midi. for what it is, a great real time live sampler that
> has just enough functions to keep it interesting and challenging on stage
> and at home, the rang is the best bet for me. one year when i have more
> time, haha, on my hands i will purchase an edp, repeater to see what all
the
> fuss is about. my learning curve time allowance is too thin these days 
>for
> such a new endeavourer.
>
> best wishes and good luck with your choices. either way you can't go
wrong.
> get them both if and when you can. i eventually will. for now the rang
> forfills my needs above and beyond at home and on stage.
>
> if you have any rang set up questions feel free to contact me.
>
> peace
>
> jimmy george
> http://www.jimmygeorgearts.com
>
>
> >
> > Re:Electrix products:
> > Am I right in thinking that for all their midi capabilities,
> > there are no preprogrammable memories on the majority of Electrix
> > processors?  I mean, some of them look great (particularly the mofx) 
>but
> > since I need to play my guitar (which makes changing fx setting 
>somewhat
> > difficult), without presets it's of limited use.  The webpage doesn't
seem
> > to address this anywhere...
> >
> > Mike
> >
> >
> >
> >
>
>
>