Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

R: HELP!!!!



Title: HELP!!!!
I have had the same problem (maybe Andy remembers that "italian" edp arrived from Nashville).
I think i remember Andy at Trace Elliott fixed it by cleaning eprom's contacts...
I think they were his first days into Edp's world.
I can remember...you don't feel so stable when you Edp acts like that...
luca
 
 
 
----- Original Message -----
From: Andy Ewen
Sent: Tuesday, May 22, 2001 3:33 PM
Subject: RE: HELP!!!!

Steve,
If it's been working in NY for some time, we can probably rule out the old 'crystal tolerance timing' problem. It's most likely to be faulty or dirty RAM SIMMs. Carefully remove each one in turn and clean the connector edges with either a fibreglass pencil, (used by draughtsman), or a standard rubber pencil eraser.
I've also had the same problem with the EPROMS gradually working their way out of their sockets. If the RAM cleaning doesn't work, I'd remove each socket mounted chip in turn and re-seat them.
Pressing Parameters while booting is the magic reset, but I think Claude has already mentioned this. Your continuous Loop 3 problem however, is very unlikely to be cured with a re-set.
If all this fails, threaten it with severe physical damage; it probably still won't boot but you'll feel better.
Good luck, let us know what happens,
Andy.
 
 
 
 
 -----Original Message-----
From: Steve Sandberg [mailto:stevesandberg@earthlink.net]
Sent: 22 May 2001 11:58
To: Loopers-Delight@loopers-delight.com
Subject: HELP!!!!

Can anyone help?  I have an extremely important solo show at the Knitting Factory tonight in New York.  I've just gotten up -- it's 7 AM -- and my EDP is not working.  When I turn it on, all that happens is "Loop 3" flashes over and over.  
Is there any way to reset it?
Also, -- and this is asking a lot -- is there anyne in NYC with an EDP who would lend it or rent it to me for one night?  
Thanks . . .