] [Thread Prev
Re: Repeater & EDP: Ideas for synergy
i've been thinking about this a bit over the last few weeks as i try to
looper rig together for gigging. obviously one could use a midi merger to
information and sync from one to the other, but wouldn't it be better if
had an option to merge midi in with midi out? this would simplify things
quite a bit i think...
whadyasay matthias? can this be added to the edp?
> Neil Goldstein
> Portland, Oregon
> > -----Original Message-----
> > From: rich [mailto:firstname.lastname@example.org]
> > Sent: Monday, October 29, 2001 9:32 AM
> > To: Loopers-Delight@loopers-delight.com
> > Subject: RE: Repeater & EDP: Ideas for synergy
> > >
> > >I realize the biggest drag about using either EDP or Repeater as clock
> > >master to the other is that midi commands from my foot
> > controller will only
> > be seen by the master unit.
> > huh? could not the footcontroller be setup to send multiple commands
> > on different midi channels (one for the EDP and one for the
> > Repeater)? i've been playing with this a bit on a Rolls Midiwizard,
> > controlling a jamman and a mofx.
> > don't the EDP and Repeater pass midi thru?
> > rich
> Yes I've been passing midi through to my EFX too. But think about it:
> you take the midi OUT of the EDP into the midi IN of the Repeater, you
> in effect preventing any midi commands entering the Repeater. If you take
> the midi THROUGH from the EDP into the Repeater then you can use your
> controller to control both (this is how mine's set up). But then you
> 3rd party midi clock keeping it all synced.
> Would not mind being proven wrong about this, but it appears if you want
> use the EDP's clock to control Repeater (or vice versa) you lose lots of
> remote control functionality.