] [Thread Prev
RE: new echoplexer: wanna copy loop and then change it
any FULL-FEATURED midi controller will work. Digitech PMC-10, Lake-Butler
Midigator, Rocktron AllAccess, Yamaha MFC-10, Roland FC-200, and I guess
the new behringer FCB1010. (I haven't looked into that last one much so
At 10:51 AM 2/12/2002, Michael Clark wrote:
>Can you suggest a foot controller that will do the same thing?
>At 10:51 PM 2/11/02 -0800, you wrote:
> >Copying a loop is easy--right? Create a loop, copy it.
> >So once you have copied the loop, modify it with the other button
> >presses--overdub, multiply, but probably not insert because your
> >will not be there--and if you want another copy of the percussion loop,
> >back to loop 1 and this time copy it to a different loop.
> >By the way, changing to a specific loop is easy with MIDI. If you have
> >keyboard, the Echoplex will go to any of 9 loops based on the MIDI
> >controller (note or Continuous controller) you have assigned under loop
> >trigger (parameter bank 4, mute button).
> >You might want to pretend the manual is the Holy Bible and you just
> >sanctified by the loop.
> >Also download the archives :>}
> >PS I have not tried this but maybe instead of performing and trying to
> >operate the EDP at the same time, sue prepared audio and feed it into
> >EDP so you can concentrate just on that--my experience with such things
> >that it's hard to concentrate on two things at once.
Kim Flint | Looper's Delight
firstname.lastname@example.org | http://www.loopers-delight.com