Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Fwd: RE: Mackie Mixers



Hey LD,
is this true would i need a bigger mixer.  i have seen lots of people use 
the 1402 w/lots of gear in the rack.  i don't know if i would necessarily 
use a pod, probably a vht power amp and some pre.
thanks
matt


>From: "Rainer Thelonius Balthasar Straschill" <rs@moinlabs.de>
>Reply-To: <rs@moinlabs.de>
>To: <Loopers-Delight@loopers-delight.com>
>Subject: RE: Mackie Mixers
>Date: Fri, 21 Feb 2003 18:00:10 +0100
>
>Matthew,
>
>the 1202 and 1402 are identical with regards to mic pres - at least that's
>what mackie says. For me (owner of a 102), from the description from 
>mackie
>they seem to be exactly the same except for the two additional channels of
>the 1402.
>
>I'd suspect the 1202/1402 might be a tad bit too small for your 
>application
>as far as routing possibilities go. What you might be doing is coming into
>two channels from the POD (does the guitar pod have a) stereo outs, b) DI
>out? if a) and b) are answered "yes", you'd need three channels (one mono,
>one stereo)), let's say going (example with 1202) into channels 1 and 2 or
>1-3. The mono EDP goes into Ch4, with the G Major -> Ch 5/6, the Vortex ->
>Ch 7/8, the Gr-30 -> 9/10 and two ins remaining. Then you could feed the 
>EDP
>with aux 1 (pre-fader), the G Major mono with aux 2, and the Vortex stereo
>from the Alt 3/4 bus. Then you'll have the problem that when anything is
>sent to the Vortex, you can't easily send it to the EDP or G Major before
>the Vortex -> get out the soldering iron and do the "Auxes before Alt/Mute
>button" mod as described in the mackie's manual.
>
>That way, you would already lose the possibilty to access the G's second
>input. And there isn't much room for expansion effect-wise. If you're not
>absolutely sure that you'll never get another piece of gear, I'd suggest
>using a slightly bigger mixer, like the Mackie's xx04s or the Behringer
>pendant, MX2642.
>
>As far as the knob/fader topic goes - I personally don't like knobs for 
>two
>reasons: they don't allow me to move more than one channel's volume with 
>one
>hand (not without some though mikado drills that is), and they don't allow
>me to see the set volume levels by simply looking at the mixer from a
>distance.
>
>So, my two recommendations would be 1) get a mixer with more auxes and/or
>more subs, 2) get a mixer with faders. As for these recommendations, I use
>(besides the 1202 in my small rack and a MX2642 as a "afterguard console" 
>if
>I suddenly need more mixing) a MX2642A for my larger rack, and it is
>(although people keep bitching about Behringer all the time) well 
>acceptable
>for my not so pristine ears. (I also do use a DDX3216 for the larger
>chores). And the 2642A goes (here in Germany) new for €289 - which is 
>about
>half the price of a 1202.
>
>
>       Rainer
>
>Rainer Straschill
>Moinlabs GFX and Soundworks - www.moinlabs.de
>The Straschill Family Group - www.straschill.de
>digital penis expert group - www.dpeg.de
>Eclectic Blah - www.eblah.de
>
>
> > -----Original Message-----
> > From: Matthew Wiley [mailto:matthewf5@hotmail.com]
> > Sent: Freitag, 21. Februar 2003 01:02
> > To: Loopers-Delight@loopers-delight.com
> > Subject: Mackie Mixers
> >
> >
> > Hey LD,
> > for those of you who use mackie mixers, what if any are the
> > differences
> > between the 1202 and 1402 vlz mixers.  the 1202 has knobs and
> > the 1402 has
> > faders and two more inputs.  which one could be superior over
> > the other as
> > far as mic pres... i am using a tc electronics g major,
> > vortex, EDP, line 6
> > pod recording, gr-30 synth, vht stereo power amp.  i am
> > wanting to route
> > effects through and around loops etc... any suggestions would
> > be great
> > thanks.  thanks to the LD for helping find my vortex, the LD rules.
> > thanks,
> > matt
> >
> >
> >
> >
> > _________________________________________________________________
> > MSN 8 with e-mail virus protection service: 2 months FREE*
> > http://join.msn.com/?page=features/virus
> >
> >
>
>


_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*  
http://join.msn.com/?page=features/junkmail