] [Thread Prev
Re: Echo Pro & MidiBuddy
Could this be a problem with how the midibuddy is set
to. I have the MidiWizard and you can set the program
changes to start at 01 or 00. For example - this would
mean if I want to access program 1 on the Line 6 and
have the MidiWizard set to 00 I would actually need to
--- dgoat <firstname.lastname@example.org> wrote:
> Tim Nelson wrote:
> > However, I'm noticing that the functions are
> > than described in the Line6 manual for programs
> > 101-105. I actually prefer the way it's working
> > is exactly as DG described, with most of the
> > functions lined up on the controller's bottom
> > The functions, rather than corresponding to their
> > descriptions in the manual, are more like the
> > notations on the Echo Pro's front panel.
> > 101: seems to be Play/Stop (manual says: RPSPS)
> > 102: seems to be Play/Stop (manual says: RSPSP)
> > 103: does nothing (manual says: Record Only)
> > 104: Stop (manual says: Overdub Only)
> > 105: Record/Overdub (manual says: Stop Only)
> > 106: Play/Stop (same as manual)
> > 107: Play Once (same as manual)
> > 108: Half Speed (same as manual)
> > 109: Reverse (same as manual)
> I don't think the problem is with the midibuddy, but
> with the line6
> manual. The descriptions for prog changes 101 and
> 102 are accurate.
> Don't forget that the looper must be reset for them
> to begin recording,
> rather than simply toggle on/off.
> The description for prog change 104 (Looper Overdub
> only) actually
> belongs to prog 103. The description for prog 105
> belongs to prog 104.
> Prog 105 works just like button 1 (far left) on the
> DL4, which is
> However, if you use 101 - 104, or 106 to turn the
> loop off, then when
> you hit 105 again, it starts back at the top with
> record, wiping out
> whatever loop was in memory.
> Hope this helps.
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!