Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

EDP Knob Gone Bad--Where Do I Get it Fixed?



-----> I have this problem with the output knob of my original Echoplex!
I tried cleaning it with tuner clear recently and only made the wobble (and
disfunction) worse.  I don't have the skills to replace this--do I call
Shane?
Gary

-----Original Message was From: Matthias Grob 

Talking about pot replacement on the EDP.
if you unscrew the front and take off the knobs (just pushing) you probably
can feel whether the input knobs axis is a little looser than the others.
if this is not the case, the problem may not be that it broke, but may be
the pot anyway.
Might be interesting to verify with a ohm-meter: measure the total
resistance of it, while moving it...

if you are not familiar with a soldering iron and multilayer PCB, and
willing to do the fix yourself, we better stop this discussion, because a
rep knows what I am saying here...

>>
>>  yes, when the potentiometer brakes it does this, a little
>>  crack in the board with the resistance layer.
>>
Thread started by Dave Eichenberger