[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: Preset EDP feedback

Ohhhh! I got it! So I just send the CC# and a certain value by regular
pedal...gotcha...easy enough..thanks!

Dave Eichenberger 

> What I meant was that you don't need to use sysex to 
> accomplish this - you can use cc messages instead of sysex.  
> Since you've already programmed a pedal to send continuous 
> messages, you've got all the information you need to send 
> discrete control messages.
> At 05:14 PM 2004.06.22, hazard factor wrote:
> >Right- it was more of an EDP question than a PMC one...I 
> just have no 
> >idea what the sysex commands to map to the pedals would be, som hex 
> >string, I am guessing. I planned on adding some 'feedback 
> presets' to a 
> >bank if I am using the CC pedal for something else.
> >
> >Dave Eichenberger
> >http://www.hazardfactor.com
> > 
> >> 
> >> You don't have to use a pedal to send a cc - you can send 
> a cc of any 
> >> value by hardcoding it into one of the strings for a pmc 
> preset (100% 
> >> feedback would be a value of 127 for whatever controller feedback 
> >> happens to be, 0% would be a value of 0).
> >> 
> >>