Re: Stereo EDPs and Slight Timing (I've made the recommended settings, etc)

["David Kirkdorffer" <vze2ncsr@verizon.net>]

A slight refinement on Luis' post -- that is: if you have Oberheim and
Gibson EDP's in stereo AND you're running the latest Loop IV software on
them both, that might be the problem.  I have exactly this set-up, and
exactly this "drifting" problem.    The problem did not exist with the same
EDP's when they were running Loop III.

David


----- Original Message ----- 
From: "L. Angulo" <labalou2000@yahoo.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Monday, September 06, 2004 2:26 AM
Subject: Re: Stereo EDPs and Slight Timing (I've made the recommended
settings, etc)


> you might want to change the stereo cable to check if
> its ok, otherweise if you have an oberheim EDP and a
> gibson one that might be the problem some of them
> donīt sync.
> Cheers
> Luis
>
>
>
> --- Kim Flint <kflint@loopers-delight.com> wrote:
>
> > At 01:25 PM 9/5/2004, Krispen Hartung wrote:
> > >I know this topic has probably been beaten into the
> > ground on previous
> > >threads, but I've searched for past threads, read
> > the EDP+ manual (page
> > >2-9 on Stereo operation and page 6-7 on
> > BrotherSync), made those
> > >settings on my unit, and I still get a slight
> > timing drift on occasion.
> > >The timing doesn't get continuously worse over
> > time; rather it just
> > >diverges to the point to where it sounds like I'm
> > running a 50MS delay
> > >on my guitar.
> >
> > sounds strange. How are you controlling them?
> >
> > kim
> >
> >
> >
> ______________________________________________________________________
> > Kim Flint                     | Looper's Delight
> > kflint@loopers-delight.com    |
> > http://www.loopers-delight.com
> >
> >
>
>
> =====
> www.luis-angulo.com
>
>
>
> _______________________________
> Do you Yahoo!?
> Win 1 of 4,000 free domain names from Yahoo! Enter now.
> http://promotions.yahoo.com/goldrush
>