] [Thread Prev
RE: EDP - feedback interaction with undo question
I try using an example:
When you have the feedback at 100% the loop repeats endlessly.
When you set it to a value, say, that the loop will repeat once at full
volume, once at half the volume and then disappear.
You now have to turn the Feedback to 100% if you want the following changes
not to be again affected by feedback.
Now if you do a long Undo press it will bring back the 50% version.
Another long Undo press will bring back the 100% version.
So the feedback value itself will not return to its original value by
So, generally: Any change to the loop will be stored as its own version
until the memory is exhausted. Pressing long Undo will step you backwards
through the stack of versions.
> -----Original Message-----
> From: Jesse Chappell [mailto:email@example.com]
> Sent: Freitag, 5. November 2004 06:17
> To: firstname.lastname@example.org
> Subject: Re: EDP - feedback interaction with undo question
> Is it a one time undoable, or does it treat every burst of feedback
> change as a new state (if memory allows)? And when you undo it, does
> the feedback return to its original value?
> On Fri, 5 Nov 2004 02:21:33 +0100, Bernhard Wagner
> <email@example.com> wrote:
> > It does treat changing the feedback as something undoable (as
> long as memory
> > permits)
> > Bernhard
> > > -----Original Message-----
> > > From: Jesse Chappell [mailto:firstname.lastname@example.org]
> > > Sent: Donnerstag, 4. November 2004 19:39
> > > To: Loopers-Delight@loopers-delight.com
> > > Subject: EDP - feedback interaction with undo question
> > >
> > >
> > > Having never used an actual EDP, I'm curious about how it handles
> > > changing the feedback (down from 100%) during regular playback with
> > > regards to the undo state. Does it treat the action of changing the
> > > feedback as an undoable operation? Only on the first change?
> > >
> > > jlc
> > >