Support
Looper's Delight
|
Support |
|
|
I didn't dump them, rather I just programmed one and other one followed along because of the MIDI connection between the two. Kris ----- Original Message ----- From: "Luis Angulo" <labalou2000@yahoo.com> To: <Loopers-Delight@loopers-delight.com> Sent: Monday, January 16, 2006 12:38 AM Subject: Re: 2nd EDP+ for stereo > Hey Kris, > Can u tell me how to quickly dump all the presets from > the master EDP to the slave? > thanx > Luis > > --- Kris Hartung <khartung@cableone.net> wrote: > >> I use two EDPs in true stereo. We've had this >> discussion before on the list, >> and playing in stereo is less important to some than >> others, but for me it >> is essential to my "current" sound, given all the >> stereo imaging I use with >> my laptop VST effects. I'm also an addict of lush >> stereo chorus and stereo >> delay where the left side is lightly longer than the >> right. >> >> In any event, I have had no troubles with my setup, >> except initially when >> trying to figure out how to get the two EDPs to sync >> up and prevent signal >> drift. When you get to that point, send me an email >> and I'll send you the >> list of parameters. >> >> I run from my into my Boss VF1 from my guitar, out >> of the VF1 in stereo, >> into my laptop in stereo, out of the laptop in >> stereo, into my Mackie mixer >> board (two channels panned left and right), and then >> I run out of the >> mixer's BUSS 1 into the input of one EDP, and out of >> BUSS 2 into the input >> of the other EDP....then out of the two EDPs into >> two channels of the board, >> panned left and right. This way, when multiple >> people or instruments are >> plugged into my board, I can simply press the buss >> 1/2 button on their >> channel and loop them in my mix. I run an Lexicon >> LXP1 in my mixer's AUX 1 >> channel, and back into a stereo channel of the board >> for a nice reverb on >> everything. >> >> I think the results are especially noticeable and >> fun when you are recording >> off the board....then the stereo imaging really pops >> out, if you are using >> effects that to tricks in stereo. >> >> Kris >> >> ----- Original Message ----- >> From: "Dennis Montgomery" <morpheus@speakeasy.net> >> To: <Loopers-Delight@loopers-delight.com> >> Sent: Thursday, January 12, 2006 6:58 PM >> Subject: 2nd EDP+ for stereo >> >> >> > Hi all, I currently take the output from my lone >> EDP+ and send it through >> > an Alesis Microverb III to get some pseudo-stereo >> separation. I'm >> > considering adding a 2nd EDP+ so I can process my >> loops in true stereo. I >> > was wondering if any players who have taken this >> step can comment on their >> > experience of using a 2 EDP+ stereo system? Did >> it really make a >> > difference in your playing fun? Any technical >> problems? etc... >> > >> > Dennis >> > >> > >> >> >> > > > www.luis-angulo.com > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > >