Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP "Mute" button issues



Well, there's this:
http://www.loopers-delight.com/LDarchive/200402/msg00317.html
Text follows:
. From: Travis Hartnett <tiktok@sprintmail.com> 
. Subject: Re: EDP foot controller: touch buttons 
. Date: Wed, 18 Feb 2004 17:37:30 -0800 
I've encountered erratic behavior if you get dirt in the switches, such 
as when you're playing somewhere with a lot of grit on the floor.  If 
after a few tunes you start to notice an accumulation of fine black 
particles around the oft-used switches, get down there and clean 
everything off ASAP.  If possible, sweep the area you're going to be 
standing on before you start playing.  In really dirty situations, you 
may want to open up the footpedal and blow everything out with a can of 
compressed air once you get home.

The more-expensive switch option often introduces its own problems, 
such as decreased accuracy from the longer throw/greater force 
required, and an increase in the acoustic switching noise.

TravisH

I'm Gary