Support
Looper's Delight
|
Support |
|
|
Forgot to mention: Make sure the button on the "Stereo Graphic EQ" strip is in the "UP" (Main Mix) position. Also, on the FX section, make sure the FX to MON pot is all the way to the left. The bottom line: make sure all of your MON send pots are all the way to the left except for the strips that you want to send to your laptop looper. -- Kevin Quoting kkissinger@kevinkissinger.com: > Regardless of the mixer, to accomplish what you want you would need to > configure your looper (in this case, your laptop/Mobius system) as a > SEND EFFECT. > > The profx8 has two Sends, namely the MON and FX sends. > > Since you want to use your onboard reverb your FX send is already tied > up, so that leaves the MON send. > > For your return (I assume you want a stereo return) use either your > 9/10 or 11/12 strip. This will allow you to send your laptop's output > to the FX buss. Be sure that your MON send is turned down -- else you > will get feedback. Also, make sure that the FX to MON pot is turned > down else you'll get feedback. > > Remember, you don't have to use the ST RETURN to return send effects. > Also, the ST return can be used as two additional mixer inputs > (although this input doesn't have any EQ, panning, or sends). > > The MAIN OUT will go to your speakers. > > Hope this helps :) > > -- Kevin > > Thus, you would hook > > > Quoting "L.Angulo" <labaloops@yahoo.com>: > >> Hi loopers, >> i have different instruments plugged in to my compact pro fx8 >> mackie mixer then i go stereo out of the mixer into my soundcard >> and from there straight into the speakers.My soundcards fireiwre >> out straight into my macbook and mobius.Everything is cool,except >> when i puse my loops it sounds very abrupt and dry because there >> is no post proccesing.I would like to therefore take avantage of >> my mixers eqs and reverb to warmup the sound coming out of the >> soundcard before it goes into the speakers. >> What would be the most effective way to route this,is it possible >> to bring back the outs of the soundcard back into the mixer >> without creating feedback? >> my mixer does not have alt 3/4 outs,but here is the specs: >> http://www.mackie.com/products/profx8/ >> thanx for your tips! >> Luis >> >> >> >> www.myspace.com/luisangulocom >> >> >> >> >>