[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Trying software again.. YIKES!!!

Yes, Mac is simpler. OS X already has built-in MIDI channels through
the system. It's called "IAC Bus" and if not ative you have to
activate at least one IAX Bus port. That is done by opening
"applications / utilities / Audio MIDI Setup". In that application you
go "Window / Show MIDI Widow". Double-click the IAC Driver icon and
check in the box named "Ports" (for a Port... I'm not going to fast am
I?  ;-)   If no IAC Bus port is listed there you click below on the +
sign labeled "Add and remove ports" (to remove a port you would have
to click the - sign, but we're not doing that today). Ok then, close
down the Audio MIDI Setup. Now when you open Mobius you will notice in
the MIDI Devices window that a new port is available. Select it (the
newborn IAC) as "Plugin Output". In Audio Mulch there is probably a
window where you set up MIDI ports to be used by the application; make
sure newborn IAC is allowed to play with the boys in the mulch. Then
there has to be a window in Mulchy where you set up synchronization
preferences; set newborn IAC as the port where Muchie should look for
MIDI Clock master sync. If there is a box for "MIDI Slave mode" tic it
as well while you're at it.


On Tue, Jan 19, 2010 at 9:11 PM, mark francombe <mark@markfrancombe.com> 
> Nope Per.. Mac!!!! Which I´m SURE you know how to do.. but Mulch?
> On Tue, Jan 19, 2010 at 8:58 PM, Per Boysen <perboysen@gmail.com> wrote:
>> On Tue, Jan 19, 2010 at 8:23 PM, mark francombe <mark@markfrancombe.com>
>> wrote:
>>> It's "Mulch to be synched by Mobius that is running as VST" within, 
>> Depends on what OS the machine is running by. If Windows (at least XP,
>> don't know about Vista or 7), you have to download and install a patch
>> called MIDI Yoke. MIDI Yoke creates MIDI pipes inside the OS through 
>> you can tell Mobius VST to send out MIDI Clock sync signal. Then you 
>> Audio Mulch what MIDI Yoke pipe to listen at for a sync signal put into 
>> slave mode and make a loop in Mobius. Eh... forgot to tell also that 
>> has to be set as Sync Master ("sync = out" or the other one that also 
>> song start commands). I think that's it.
>> Greetings from Sweden
>> Per Boysen
>> www.boysen.se
>> www.perboysen.com
> --
> www.markfrancombe.com
> http://vimeo.com/user825094
> http://uk.youtube.com/user/markfrancombe
> http://www.myspace.com/markfrancombe
> http://www.looop.no/shop/catlabel.php?q=Synch%20Non%20Synch