] [Thread Prev
Re: EDP Stereo Looping Setup Dilemma
The FCB would certainly have saved me alot of time 15 years ago, when I had a rack full of effects and had to program them all to have the changes I needed on the same PGM numbers... if ONLY I could have programmed them all on the FCB...
But a recognised fault of the 1010 was to make it that ALL note numbers would be sent out on ONE preselected midi channel... if that could have been set on a PER PAD basis, alot of headaches could have been avoided...
On Mon, Oct 4, 2010 at 10:31 AM, Rainer Straschill <firstname.lastname@example.org>
Per sez:While I don't know whether the product designers were in contact with
> A typical mistake due to product designers not
> being in contact with real musicians.
"real muscians" (whatever that means), it seems to me that the FCB1010
was designed with another main application in mind: that being
switching programs on a multitude of separate devices which do not
share PC mapping to application (e.g. songs). And a second main
application: controlling lots of stuff (e.g. with exp pedals) on one
specific device. And for both of those, it works quite ok.