Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Echoplex Problem



It seems like I found the solution. It´s was so obvious, that I overlooked 
it.
The feedback knob was turned left, I must have changed it unintendedly.
I just don´t understand the behaviour, that after reset the position of 
the fdbk-knob does not affect the Loop-Playback, but after shutting down 
again it does.
But as long as my machine works again, i dont really care.

Thanks a lot for your help

Carsten
Am 30.04.2012 um 04:07 schrieb Matthias Grob:

> very strange in deed!
> hardly a hardware problem
> i guess you disconnected everything, especially the MIDI in to make sure 
> that the problem is inside the EDP, right?
> after it goes silent, does the loop level LED indicate that the sound is 
> still in the memory or really gone?
> if you then go to Mute and play it like a sample with Multiply or 
> Insert, does it come back?
> if you do not program your settings or only certain parameters and then 
> reboot, the same happens?
> "after the second of record" means after second press or after the 
> second recording (or a second of recording :-) ?
> do you use the Loop/Delay or InterfaceMode parameter?
> 
> 
> On 29 Apr 2012, at 6:57 PM, Carsten Wegener wrote:
> 
>> 
>> It happens like that.
>> I do a reset. Record works properly (after second it just loops on and 
>> on)
>> I do all my settings, after each new setting still the same,
>> 
>> but if I shut down the Echoplex, all my settings are saved, the only 
>> thing that changes, is that after the second of record
>> the recorded loop plays once and disappears. The length is still on the 
>> display, but no sound anymore.
>> All the lights are green. If I try to reach the Loop via the next 
>> loop-button - just the same....
>> 
>> Very strange.
>> 
>> Am 29.04.2012 um 13:53 schrieb Matthias Grob:
>> 
>>> no, we record the presets to a EEPROM
>>> and after powering up with Param pressed, that should be erased
>>> so can you save any presets so they come up again after power down?
>>> 
>>> On 27 Apr 2012, at 4:12 PM, Carsten Wegener wrote:
>>> 
>>>> It´s a normal Echoplex Looper with Loop IV, I think there shouldnt be 
>>>> a battery inside.
>>>> 
>>>> Am 27.04.2012 um 20:16 schrieb andy butler:
>>>> 
>>>>> Carsten Wegener wrote:
>>>>>> I did a reset, then it works. But I have make all my settings 
>>>>>> again. After shutting down the EDP it´s the same again with the 
>>>>>> problem....
>>>>> 
>>>>> is there a battery in there somewhere?
>>>> 
>>