Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: FCB1010 with Hardware Sampler?



Also, unless cost is a major issue, a new item like the 404sx has much better/easier sample loading than older units. Not so much with sampling directly from the analog inputs, but loading pre-existing files.

I was using a Korg ES-1 before, and the Roland is much easier to load pre-existing sames.

Rivh

Sent from my iPhone

On Aug 7, 2013, at 11:20 AM, Benjamin Whitehouse <bpwhitehouse@gmail.com> wrote:

Good point, a valid option I hadn't considered, thanks Brett (crazy rig you got there mate!).


On Wed, Aug 7, 2013 at 2:08 PM, Brent Taylor <threeleggedyoyo@hotmail.com> wrote:
Depending on how you use samples, a Digitech JamMan can also be a nice small/standalone option for sampling. I wouldn't recommend it for a lot of fast sampling, but if you just want to flip on an old movie quote once in a while, it's not a bad way to go.

~Brent
www.facebook/sciencegonewrong


From: bpwhitehouse@gmail.com
Date: Wed, 7 Aug 2013 13:47:13 -0400
Subject: Re: FCB1010 with Hardware Sampler?
To: Loopers-Delight@loopers-delight.com


Wow what a great forum, thanks so much! I'll look out for a cheap used Roland SP Sampler then!
I never knew about Keith McMillen - absolutely awesome! I play in a 3pc with a fiddler so the K-bow looks exciting.


On Wed, Aug 7, 2013 at 1:10 PM, Richard Atkinson <thetoyroom@charter.net> wrote:
Using the 1010 with a Roland 404sx. No problems at all. Havent setup the volume pedals yet, but triggering works fine. Having one pedal set to 'all off' is nice, too.

Rich

Sent from my iPhone

On Aug 7, 2013, at 9:14 AM, Benjamin Whitehouse <bpwhitehouse@gmail.com> wrote:

> Hi!
>
> I've searched the website and seen many posts for the FCB1010 but cannot find the answer I am looking for.
>
> I have the FCB1010 and I would like to use it to control a sampler eg a Roland SP-303 however I have read posts on other forums suggesting that this will not work due to the FCB not sending note on midi messages.
>
> Is anyone here using the FCB1010 with a hardware sampler to trigger samples?
>
> If not, is anyone using a different pedal/sampler arrangement that they could recommend? I am a keyboard and guitarist and want to be able to trigger samples on and off using the footpedal. If the volume pedal can be used to control volume, that would be great too.
>
> Thanks!




--

Benjamin Whitehouse
514.573.5135




--

Benjamin Whitehouse
514.573.5135