Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Strange EDP SusSub thingy



Right, got it.

If you're using Quant what you're getting *is* the expected behaviour.

If the Sub is still waiting to start the Note-Off is ignored,
unless your doing it via InsertMode.

Unfortunately it's something that didn't get fixed in Loop4.

now read on


On 24/11/2013 12:17, mark francombe wrote:
I have triple checked The note off. weirdly if i set the pedal to do a
regular insert, and set the insert mode to sub, ( + 8ths + quantise
on) it works as expected, the typical 8 note sequencer sound. But
setting it to direct midi, substitute, doesnt work! This is annoying,
as I dont want to have to change presets for this effect, as i tend to
use presets simply as different 8th note settings...

BUT! I have another problem, cant believe its related tho.
After power up, ONE of my edps has feedback set to 0, and plays a loop
only once, I have tried to save a preset with feedback set to 127, and
I can change presets and back again and keep this setting. Plus all
other settings in that preset are retained. BUT after a restart, it
always reverts to feedback =0!! I thought it may be a battery, but as
I  say all other settings seem to be ok!

Don't think fbk is saved in the preset.


As the 2 edps are linked via brother, it might be that one is
affecting the other... but I don't know.
I also can't say when this started happening, and if it's the same
time as my other problem.

Well, now we know it's not related to the other problem.

First, the workaround is RecordMode=SAF.
Apart from that, I don't know.

Have you tried different Loop/Delay Modes?

Could it be something sent by the Gordius on it's boot up?

Do you have anything plugged into the expression pedal socket?
Or maybe that's faulty itself. Don't know if the socket has switches,
or if they'd produce this result on fail, but those do
get oxidised and stop making contact sometimes.

If it was the other edp doing this then normally it would also have fbk=0


Don't remember coming across this before, needs a bit of fault finding.


andy



Mark

Sent from my (advertisement removed)

On 24 Nov 2013, at 13:02, andy butler <akbutler@tiscali.co.uk> wrote:

The symptoms point to a lack of (or incorrect) Note-Off
in the second message stream

andy
ps. didn't see this post before

On 23/11/2013 19:23, mark francombe wrote:
Is it OK to bump this?
Andy??? Mathias?
Ive been trying all sorts of things for 3 hours now.. cant figure it out!!

Problem follows...


On Fri, Nov 22, 2013 at 11:48 PM, mark francombe <mark@markfrancombe.com 
<mailto:mark@markfrancombe.com>> wrote:

    Just been programming a few things into my Gordius, and suddenly 
realised that my Sus Substitute pedal wasn't working properly...

    Im sure it should be correctly programmed Ive tried both

    A# 10 SubstituteButton Virtually presses the “Substitute Button”
    and
    A# 22 SUSSubstitute Sustain Action Substitute

    Im sure theres something weird in the preset, but dont know what.

    This is whats happening. I can make a loop as normal with REC and 
OVERDUB and MULTIPLY no problem (mention that cos it might have been due 
to 0 feedback setting)

    But now I hit this Sus Sub pedal and sound stops dead, and I get 
exactly 1 repeat. Exactly like Ive gone into Overdub, but with Feedback 
reduced to 0...

    What is THIS???


    Mark



    --
    /_Mark Francombe_/
    www.markfrancombe.com <http://www.markfrancombe.com/>
    www.ordoabkhao.com <http://www.ordoabkhao.com/>
    http://vimeo.com/user825094
    http://www.looop.no <http://www.looop.no/>
    twitter @markfrancombe




--
/_Mark Francombe_/
www.markfrancombe.com <http://www.markfrancombe.com/>
www.ordoabkhao.com <http://www.ordoabkhao.com/>
http://vimeo.com/user825094
http://www.looop.no <http://www.looop.no/>
twitter @markfrancombe