[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: Custom pedals and pedal boards (WAS: anyone want to swap theirBeige EDP for a Black EDP Pro Plus)



Shouldnt be a problem, basically the old custom controller is a resistor based box similar to the official one but with two offset rows spaces close together, it has the same footprint as a DL4 .

then i added an fcb1010 which is my main controller with the other one now controlling my loops when i am at my drum kit,

the next step i am putting together is a hacked and resoldered fcb1010 which will loose the rocker pedals and end up in another dl4 sized box , but with 10 buttons in two rows of 5

ifyou need any advice just let me know


From: thedarrow@gmail.com
Subject: Re: Custom pedals and pedal boards (WAS: anyone want to swap their Beige EDP for a Black EDP Pro Plus)
Date: Wed, 3 Mar 2010 23:10:48 -0800
To: Loopers-Delight@loopers-delight.com



I'd love to see a pick / hear about your custom control pedals. 

And actually, sources for custom hard case pedal boards where you just take the top off and roll, if you or anyone has any suggestions.

On Mar 3, 2010, at 8:18 AM, phillip wilson wrote:

Hi Guys, I have been out and about gigging a lot so havent been active for a long time on here.

I have finally admitted to myself that I need a rebuild of my pedalboard and effects rack.

I have squeezed as much as I possibly can out of the space I have available but have hit a sticking point

because of the unusual and apparantly rare way I use my EDP and the updated CE spec, my blackface needs a DI box which up to now has sat in my racks back part. my new design doesnt have room for a back element and I really am keen to keep my setup plug in and go (which is possible with my 2 older whiteface edps which only have the older 1 ground point spec.

Andy Ewan has cinfirmed that there is nothing wrong with my setup (just the way I choose to use it, and that the Blackface unit is actually QUIETER when used correctly in a studio environment or through a DI etc which again from my old setup I can concur.

so basically what Im asking is if anyone onlist would like to swap their old whitefaced EDP for a very good condition Blackface?

I would be happy to throw in TWO official controller units as a sweetener as I control all my EDPs through custom pedals.

Like I say, if you are using your EDP in normal situations you will actually get better audio to noise...I just want a final solution to my ground loop on the go!!

thanks

Phill MyOneManBand

PS Im in the UK.



Do you want a Hotmail account? Sign-up now - Free



Do you have a story that started on Hotmail? Tell us now