Re: sync JamMan to EDP?

[andy butler <akbutler@tiscali.co.uk>]

Yes, they sync with midi 100%
...but
Only if the JamMan is in Loop mode.
In echo mode the jamMan doesn't sync at all.


If EDP is master, then the JamMan produces some nasty
glitches at the loop start/end.

In loop Mode, the JamMan is very low featured.
With only Record, Overdub(or Mute, or Replace) and Reset available without 
midi
control.
With midi ProgChange , you can stop/start the loop, or make
it fade out. If you're overdubbing when you hit the fade command
it continues to overdub.
...but 
Fade out is glitchy at the loop start/end (eveb without Overdub).
All midi controls have high latency.


So, while the combination works you're much better off
just using the EDP to it's full potential...
you'll have more fun, 
create more interesting arrangements,
and it'll be easier to develop your music.

hope that helps
andy butler



Jerry Kosak wrote:
> Hi,
> 
> This may be an antiquated request ( I couldn't find any posts other than 
> one from 1996 asking the same question, but with no responses), but I 
> will try anyway.
> Is it possible to sync a Lexicon JamMan with an EDP?
> Thanks,
> Jerry
> 
> Jerry Kosak
> jerry@jerrykosak.com
> 
> 
> 
>