But you are not saying that you are in mono are you Bill...?Its not like a mono guitar going thru a mono effect to a mono looper to a mono amp?Yes thats what i was saying, for simplicity sake I run mono, though I run my fireworx in the individual channel inserts so any stereo effects sum to mono. I run my looperlative mono in the master effects loop but I will occasionally run additional aux outputs from the LP-1 to individual channel strips on the house mixer which would then allow me to pan those loop tracks from the main board. After looking at it closer, you could run the Dtar in true stereo if you don't use the master effects loop. You could simply take your outputs from the individual channel inserts and run those to your effects processor and looper. You would still have the benefits from the Dtars eq and could still run the master out put as well if you are sending to a house board, That way you could have stereo effects and loops as well as a dry mono signal that you could put in the center of the mix and hard pan the effects and loops.Bill