[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP DC offset
Thanks for the suggestion, but I think it's something else. Here's the
symptoms:
Nothing connected to input jack. Output jack connected to channel of PA
system (TASCAM board).
0) Power-up EDP.
1) No unusual noise.
2) Record any length loop. Say 10 seconds.
3) When loop plays back (upon second press of record), I hear a soft
white-noise, rushy-type sound.
4) The volume of the noise is affected by the Output fader.
5) Long press on record to erase the loop. Noise disappears.
I don't hear the noise when I do the same experiment with my other EDP.
Any ideas?
Dennis Leas
-----------------------------
dennis@mdbs.com
-----Original Message-----
From: Hawkeye255@aol.com <Hawkeye255@aol.com>
To: Loopers-Delight@annihilist.com <Loopers-Delight@annihilist.com>
Date: Wednesday, May 05, 1999 12:39 PM
Subject: Re: EDP DC offset
>Any noise I've ever gotten out of my EDP has always been solved by
>lowering
>the input a little. Don't know if that's what's happening with you or
>not....
>
>Hawkeye
>
>