Re: Problem or not? (EDP)

[Kim Flint <kflint@annihilist.com>]

if you turn midi off on the master, or change the type of midi command, it
won't be sending midi to the slave anymore. So the slave won't change! They
both have to be set the same. Kind of like hanging up your telephone, then
wondering why your friend can't hear you talking anymore. :-)

Just go to the slave and change it manually if you really need to set them
this way on the fly. Usually you would just set this to something and leave
it that way.

kim


>Hi Folks, well I have two EDP with MIDI CONECCTION. All the funtions work
>ok, but when I press in MIDI PARAMETERS, CONTROL SOURCE....
>
>
>
>                edp MIDI out                edp MIDI in (slave)
>
>FIRST           NOT                         NOT
>1 PUSH          CTR                         NOT  (don't CHANGE)
>2 Push          OFF                         NOT    (don't change)
>3 Push          NOT                         change a second to CTR and Not
>again.
>
>
>What Happend? I need to work with to edp in CTR. I don't use brother and
>beat sync.
>
>I interchange the edp, and work in the same way.
>
>I have two EDP with 198 seconds, with LOOP 3 UPDATE 5.0
>
>Thanking you in advance.


______________________________________________________________________
Kim Flint                   | Looper's Delight
kflint@annihilist.com       | http://www.annihilist.com/loop/loop.html
http://www.annihilist.com/  |