[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: DL4 question
Ahh...now i get what your trying to do. Like if you set a sound you like
in Tube Echo for example. Any time you turn the selector knob back to Tube
Echo, it will be the sound you made? Is that it? I wouldn't know how to
do that, even if it can be done. Let us know what comes up from Line 6. I
am going to the NAMM show in LA, and Line6 had a pretty cool booth last
year. I will see if I might be able to chase someone on that if you don't
get anything before then...
later,
rich
At 06:27 PM 1/17/00 -0500, you wrote:
>Hi Rich and all
>
>I'm afraid I phrased my question incorrectly.
>
>I don't want to reinstate the factory settings but rather change them for
>each model. The manual says that when you choose a model via the "model
>selector" knob, Line 6 has preset that model with a particular setting.
>This can be temporaraly adjusted by turning the various knobs but if you
>select another model then reselect your first one, the settings go back to
>the factory preset. These are the settings I want to change without
>having
>to assign them to the three footswitches.
>
>I guess I will try to email Line 6.
>
>Thanks a bunch.
>
>Jim
>
>
>----- Original Message -----
>From: Rich <rich@nuvision.com>
>To: <Loopers-Delight@annihilist.com>
>Sent: Monday, January 17, 2000 1:17 PM
>Subject: Re: DL4 question
>
>
>> If you look in the manual, it will tell you how to reset the factory
>> presets (it's in the same place where it describes how to change the
>'true
>> bypass' function). But, technically, there are no 'presets' for each
>delay
>> type. The three preset buttons are three presets chosen from the entire
>> selection, there aren't three for each delay type.
>>
>> rich
>>
>> At 10:44 AM 1/17/00 -0500, you wrote:
>> >I have recently got my Line 6 DL4 and really like it. I know that you
>can
>> >reassign the three switches to one's own personal patches but is there
>a
>way
>> >to redo the factory settings for each delay type? This is the setting
>that
>> >is automatically selected when you turn the left knob to a desired
>model.
>I
>> >can't seem to find an explaination in the manual.
>> >
>> >Thanks again.
>> >
>> >Jim
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
>