[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: DL4 question
DL-4 does not have the ability to save different sounds for each
position on the rotary switch, and those cannot currently be changed.
George
"K. Douglas Baldwin" wrote:
>
> I'm quoting from the manual here(page four, first paragraph, second
> sentence):
> "...when you find a sound you want to keep...press and hold one of
>the
> memory location stomp switches for three seconds, and the setting of all
> your knobs is committed to the stomp box's memory."
> If I'm reading that correctly, by doing this little 3-second stomp
> routine, you will preserve that setting whenever you call up that
>particular
> model, whether you assign that particular model to a stomp switch for
> retrieval or not.
> By the way, gang, I'm about to review the Line 6 DL4 and MM4 for
>Guitar
> World. Y'all probably know more about it via various newsgroup and web
> postings than I will before the review is due (this Friday). Wish me
>luck.
> Douglas Baldwin, Alpha male Coyote, the Trickster
> dbaldwin@suffolk.lib.ny.us
>
> -----Original Message-----
> From: James Ko <Kojaque@email.msn.com>
> To: Loopers-Delight@annihilist.com <Loopers-Delight@annihilist.com>
> Date: Monday, January 17, 2000 6:27 PM
> Subject: Re: DL4 question
>
> >Hi Rich and all
> >
> >I'm afraid I phrased my question incorrectly.
> >
> >I don't want to reinstate the factory settings but rather change them
>for
> >each model. The manual says that when you choose a model via the "model
> >selector" knob, Line 6 has preset that model with a particular setting.
> >This can be temporaraly adjusted by turning the various knobs but if you
> >select another model then reselect your first one, the settings go back
>to
> >the factory preset. These are the settings I want to change without
>having
> >to assign them to the three footswitches.
> >
> >I guess I will try to email Line 6.
> >
> >Thanks a bunch.
> >
> >Jim
> >
> >
> >----- Original Message -----
> >From: Rich <rich@nuvision.com>
> >To: <Loopers-Delight@annihilist.com>
> >Sent: Monday, January 17, 2000 1:17 PM
> >Subject: Re: DL4 question
> >
> >
> >> If you look in the manual, it will tell you how to reset the factory
> >> presets (it's in the same place where it describes how to change the
> 'true
> >> bypass' function). But, technically, there are no 'presets' for each
> >delay
> >> type. The three preset buttons are three presets chosen from the
>entire
> >> selection, there aren't three for each delay type.
> >>
> >> rich
> >>
> >> At 10:44 AM 1/17/00 -0500, you wrote:
> >> >I have recently got my Line 6 DL4 and really like it. I know that
>you
> >can
> >> >reassign the three switches to one's own personal patches but is
>there a
> >way
> >> >to redo the factory settings for each delay type? This is the
>setting
> >that
> >> >is automatically selected when you turn the left knob to a desired
> model.
> >I
> >> >can't seem to find an explaination in the manual.
> >> >
> >> >Thanks again.
> >> >
> >> >Jim
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >