[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: four-channel output/surround reverb
Dear Dennis,
About the only way that I know of doing this is to use a pair of
stereo
reverbs or a trio of stereo reverbs such that you'd end up with something
like this:
front of the audience front of the audience
_
| | | |
back of the audience back of the audience
You'd probably want to make sure that all of the reverbs were the same
model
and mods to them and essentially they would each have an output to the
front
series of speakers and then an output to the rear as well. I've worked
with
the three reverb method using a set of Alesis MIDIVerbs which were all set
to
a soft ping pong effect. Flip side of this was trying to get everything
all
wired up outside of the house speaker/board system which everything else
was
going through at the time.
As for getting a real surround sound set up or THX, I know that there is
computer equipment out there for it, and at last go it was all rather
expensive.
Loop on, patch out!
Lee-ohki.