[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Power-on problem
First check the internal fuse (unplug power cord
first). I have had these blow in more than one EDP.
I ended up putting in a slightly larger value fuse
after replacing the fuse several times after just a
few power cycles. For my EDPs, the stock value fuse
is marginal. I checked the current draw on 3 EDP,
finding no difference in them, installed a fuse that
carried about 1/4 amp more current. This seems to
have remedied the power on current surge blowing
fuses.
bret
--- Chris Chovit <cho@newdream.net> wrote:
> Arrrgh! One of my EDP's appeared to have died on
> me: it won't power up --
> no lights, nothing! It is as if it wasn't even
> plugged in (but it is, of
> course). Anyone else ever have this problem? I am
> figuring it could be a
> bad power cord jack, power switch, or power
> transformer......any idas
> and/or recommendations of repair shops would be
> greatly appreciated.
>
> Thanks,
> Chris
>
>
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com