[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: R: Live horn looping
> > This brings me to my actual question. I have been getting into running
>my
> > effects in parallel instead of all in line like I used to. Does anyone
> > know of a good way to split a signal from an instrument into many
>lines
> > (6?) to run parallel effects, which then get input into the trusty
>Mackie
> > 1202 and mixed live? I am also interested in being able to mute the
>imput
> > to certain lines so that the existing loops do not get messed up.
the ultimate solution would be a mixer with enough outputs to cover
your requirements (FX sends or Group Outs)
Otherwise you could run a number of FX from each Aux out of your mixer,
which would be much better than a passive split before the mixer.
how about putting 6 pots (100K log?) in a box so you could
control i/p to each FX separately. Because you'd be
using the mixer out you wouldn't need any active electronics
to get a high quality result.
Andy Butler