Re: Repeater and EDP

[Kim Flint <kflint@loopers-delight.com>]

At 7:44 AM -0800 2/8/01, Mark Pulver wrote:
>Matthias Grob (08:34 AM 02.08.2001) wrote:
>
> >>I think the EDP's go for about $750 without the footpedal, which is 
>another
> >>$100 or so.
> >
> >right, as I understand, you need a MIDI pedal board to operate the
> >Repeater which brings the prices to the same level again.
>
>? Repeater will run from a 3 button box (e.g. FS-300) as well, and I think
>that Electrix is planing to ship one with the unit.
>
>Repeater will listen to MIDI as well for all functions, but the basic
>functions of Tap, Play/Stop, Record are covered with the 3 button box.
>

what would be the point of getting a Repeater and only using those three
functions? You could save yourself a lot of money and get a headrush or
DL-4 or boomerang and do much more than that. Seems to me a good midi
controller is essential for repeater, and those cost at least $250.

kim

______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com