Re: FS300 Footswitch Errors with EDP

[Kim Flint <kflint@loopers-delight.com>]

somehow you have too much impedance in that path otherwise. (could be in
the wiring, the switch, jack, bad solder joints, etc.)  Try lower value
resistors until it works.
kim

>Greetings--
>I got the resistors from Digikey and wired them in, but I still get the 
>same
>error.  Here it is:
>When controlling the Echoplex Digital Pro from the FS300 footswitch, the
>multiply switch occasionally also triggers the overdub.  Sometimes it does
>this instead of multiplying.  The resistor in question is a 7.87K 1/4W 1%
>metal film.  Is there any hope for this setup or do I need to go back to 
>the
>EDP footswitch?
>Gary


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com