[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: repeater question>>EDP feedback

> >what I'd really love is a feedback parameter that goes a
>  >little OVER 100%.  the reason for this is to "bring loops
>  >back from the dead," 
Use a mixer to return some of the EDP Output to its Input.
You could keep the aux send(to the EDP) turned down and use the the EDP 
feedback most of the time , which would give you the option for an exact 

If you're really into artifacts, turn the EDP Feedback to zero and use 
the mixer send for regeneration.

NOTE:mix control on EDP needs to be fully clockwise .

andy butler