Re: Repeater and the CFC

[hutton <hutton@pathcom.com>]

What I said was "the Repeater needs to be upside down for the card to be
properly placed"  I definitely was not confused ...... Perhaps you could 
send
me a proper card! You are confused to think it is a wonderful flaw ..... I
would like to have the proper card for the Repeater ........ You are 
telling a
lot of people that I am a confused person while admitting I was correct!
.......... Perhaps you will send me a proper card 14 months from this date.

"Damon Langlois (Electrix)" wrote:

> Hey loopers,
>  I have just learned that the first 100 or so Repeaters may have shipped
> with CFC cards that had the Electrix sticker on the wrong side. I think 
>this
> is how Chris Hutton got confused and thought the card needs to be upside
> down to work. The cards do not have to be inserted upside down however,
> being the early adopters of Repeater, loopers on this list will probably 
>get
> units from this first batch. You might get a card with the sticker on the
> wrong side. Just follow these instructions and you should be fine.
>
> The CFC card is keyed so it should only go in one way and should slide 
>into
> the slot fairly easily. However, if it is forced, it can be made to go in
> the wrong way. Some units are easier to do this than others. Essentially 
>the
> little "lip" on the back of the card (the end that is not inserted) faces
> the floor when inserting the card (as long as Repeater is not upside 
>down).
> If you get a card that has the Electrix sticker on the same side as the 
>lip
> it is on the wrong side. You need to insert the card with that sticker
> facing the floor. You are also very lucky because you now have a rare
> collectors item.
>
> Respect,
>
> Damon Langlois
> Creative Director
> Electrix
> Tel (250) 544-4091 Fax (250) 544-4100
> http://www.electrixpro.com