Re: EDP Input Level/distortion problems. Old story...

[todd reynolds <toddreynolds@rcn.com>]

I meant anyone in NEW YORK CITY!!!

(I'm gonna get booted OFF this list soon.  Have pity)

Todd

On 8/26/01 4:22 PM, "Kim Flint" <kflint@loopers-delight.com> wrote:

> At 09:34 AM 8/26/2001, todd reynolds wrote:
>> Remember that old thread about distortion issues with the edp? Well, I'm
>> embarrassed to admit I've always had that problem, and have never 
>addressed
>> it.   I have what I think is a pretty old one.  And ever since I 
>received
>> it, used, I've never been able to play the damn thing without clipping. 
> No
>> amount of adjustment on input gain seems to work, no matter what the 
>path
>> is, (currently I'm sending from a aux send of a mackie and returning to 
>a
>> regular channel).  If it's too low, there's not enough output.  So I'm 
>fed
>> up, and it's time to change those resistors, or get some mods or 
>whatever
>> I'm missing.
> 
> the mod to fix that has been recommended for about five years now Todd,
> that's a lot of procrastinating! :-)  It is easy to do if you know how to
> solder (or know somebody who knows how). It just requires changing two
> resistor values. It's explained in the Echoplex FAQ at Looper's Delight:
> 
> http://www.loopers-delight.com/tools/echoplex/FAQ6.html#Anchor-47383
> 
> so people aren't not confused, this problem was fixed in production
> echoplexes as of late 1997.
> 
> 
>>   I only have
>> an old email address from this list for shane radke, so I could use an
>> updated contact, or any other advice you all might have. Thanks in
>> advance...
> 
> That info is on the Echoplex page of looper's delight, there is a little
> section there for phone and email contacts at Gibson.
> http://www.loopers-delight.com/tools/echoplex/echoplex.html  Shane is
> sradtke@gibson.com.
> 
> kim
> 
> 
> ______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    | http://www.loopers-delight.com
>