[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

EDP footpedal



I'm finally getting around to replacing a switch or two from my Echoplex
footpedal.  I'm not doing it (I barely can even spell "solder!") - I
have someone that builds custom stereo components undertaking the
project.  

In addition to what Kim said below, do any of the rest of you have any
experience/suggestions?  To get at a switch in the middle, for example,
do you have to undo the whole wire from the rest of the switches, or can
you cut and splice?

Thnx, David

Kim said (on 11/20):
> 
> it is probably just the switch getting flakey. they are really easy to 
>fix.
> 
> You can by a replacement switch very cheap. They are usually stocked in 
>the
> US by Mouser:
> 
> http://www.mouser.com/
> 
> I think this is the page for it:
> 
> 
>http://www.mouser.com/products/detail.cfm?MPart=103-50211&CustRef=.&source=searc
> h&CFID=1374831&CFTOKEN=7875796
> 
> 
> If you open the footswitch up you will see that it is really very simple.
> The switches unscrew easily. You just have to desolder the two wires from
> it and resolder them to the new switch. If you or somebody you know has
> basice soldering skills, this is a very simple job.
> 
> kim
>