[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP footpedal



Dennis, thanks for the helpful tips:

> Yes, you can cut and splice.
> 
> Your friend sounds quite capable and I'm sure will do a fine job.  It's
> really a piece of cake.  However, as I recall, the switches can melt 
>easily.
> If you get the Mouser switch that is the exact replacement, you might 
>want
> to remind your friend to use a pair of needle-nose pliers (or 
>equivalent) as
> a heat sink between the solder joint and the rest of the switch.
> 
> Also, make sure and order several extra switches.  They cost so little in
> comparison to the shipping that it is a good idea. 

Yes, I did get extra switches.  
Looking forward to getting my toes back into the loop,
David