[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: reaktor/pwrbk combo useable?



I have seen Reaktor patches with tap tempo, so it must be possible, if not
obvious.

If it was Reaktor 2.3 you checked out, you should definitely check 3.0 as 
it
contains some important additions.

I'm no Reaktor evangelist, and I think dedicated hardware will always win 
on
usability, but the joy of laptop/software is that you can have as much 
crazy
stuff as you like without having to carry it, plus with Reaktor you can
change anything. Wish the max delay time was a bit longer? Just edit the
patch. Wish there was a phaser in the left channel feedback loop? Just add
one in.

As ever though, the answer is to play with the demo & see if it gets your
juices flowing.

Also - whoever it was that started this thread might like to consider
MAX/MSP as well.


cheers,
os.

os@collective.co.uk
http://www.collective.co.uk/
http://www.burningshed.com/

----- Original Message -----
From: "Darcy Clark" <darcyc@engin.umich.edu>
To: <Loopers-Delight@loopers-delight.com>
Sent: Monday, December 03, 2001 7:47 PM
Subject: RE: reaktor/pwrbk combo useable?


> I checked out Reaktor a little bit as a possible way to avoid having to
buy
> a Repeater, and in my short experience with it, I found that it was
> seemingly impossible to build a looper much beyond a long delay style of
> thing - I couldn't find a way to handle tap tempo, which to me was a
> show-stopper - that's not to say it couldn't be done, but I didn't see 
>how
> it could be done. Of course Reaktor appears to be very cool for many 
>other
> things, but I'm fairly sure that would be very hard pressed to replace
your
> EDP with it.