[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: S/PDIF- MOTU- Repeater question



Thank you for the information- I will contact MOTU on Wednesday and see 
what
they say- I am sure I am setting it up correctly- the Repeater has no
adjustments for the digital i/o and I am very familiar with setting up the
PCI-324 panel.
Thanks again.

Cliff

----- Original Message -----
From: "leocavallo" <leocavallo@groundloops.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Tuesday, December 25, 2001 12:51 AM
Subject: Re: S/PDIF- MOTU- Repeater question


> hi Cliff
>
> if you're 100% sure about the correct clocking of the 2 units (one 
>master,
> the other slave. the MOTU can be set via its PCI324 panel. dunno about 
>the
> Repeater) then contact MOTU for some clarification.
> a few MOTU users have had problems with 2408 SPDIF. I had to replace my
> 2408 mkII for exactly that problem. the unit was unable to sync digitally
> to most of the devices in my studio, when the older model I owned (2408)
> worked perfectly.
> BTW, their support and tech help was great and they were able to solve 
>the
> problem in just a few working days.
> hope this helps
> ciao
> leo
>
>
>
> At 23.03 24/12/01 -0800, you wrote:
> >Hi all-
> >
> >Just got a Repeater and the best OD pedal ever- the new Tech 21 Tri-AC-
> >I'm a happy man. Right off the bat I can say I will not be selling my 
>EDP
> >as a result of buying a Repeater- I can see they really are different
> >animals and are currently becoming aquainted in my 3 space rack. :)
Having
> >the EDP in front of the Repeater is very cool- esp with everything 
>synced
> >up midi from a Korg ES-1-
> >
> >My question is in regards to my MOTU 2408 and the Repeater- I can't get
> >the S/PDIF to work- an I am wondering if the MOTU will only handle 24bit
> >signals on a PC? But then- it doesen't work in stand alone mode either 
>so
> >that is probably not it-
> >
> >I have set the clock to the S/PDIF and all I get is noise- the noise
> >changes when I start/stop the repeater-
> >
> >If I route the digital signal from the Repeater to my TC M-One and then
> >into the 2408 it works fine-
> >
> >Any suggestions/ideas appreciated-
> >
> >Happy holidays-
> >
> >One-Happy-Looper,
> >
> >Cliff
> >
> >
>
>
> www.groundloops.com
>
> c o o l . s o u n d s  &  s a m p l e . c d s
> f r e e . s a m p l e s . a r c h i v e
>
>