Re: Event EZ Bus?

["luca" <lucafeed@tin.it>]

Steven wrote:
> BTW, what do you mean 6 auxes and 2 groups?


Hi Steven,
currently I am using as (discontinued but very close to their new Mix 
Wizard
.."xyz") Allen & Heath Gl2.
I go into trk 1 with my preamplified signal and I have 6 auxes, set up in 3
stereo couples for 3 different efx boxes.
the outs of these boxes come back through the channels' strips, so I can
route them inside each other once again.
The looper is feeded by the two group outs and its outs also come back to 2
channel strips, so I can process it.
This set up is not possible with the Ez Bus.
But it is with the Behringer.
When I check a mixer (beside the sound) I look for routing flexibility and
"phisicality" (does it make sense ?).
The ddx has for sure the flexibility; about sound and interface, I still
have to touch and hear one of them.
Let me know if you find out more.

thanks,
luca


www.unguitar.com
----- Original Message -----
From: "M. Steven Ginn" <sginn@airmail.net>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, January 02, 2002 3:44 PM
Subject: RE: Event EZ Bus?


> Hi Luca,
>
> The Behringer unit looks interesting and apparently it has been released
> and is selling for approx. $1599. (@ 8thstreet music).  It seems a bit
> much since both the Tascam and Yamaha digital mixers are less ... I know
> they don't have as many XLR connectors but they do have built in
> ADAT/TDIF which is another $300 option on the Behringer unit.
>
> BTW, what do you mean 6 auxes and 2 groups?
>
> Thanks,
> steve
>
>
> >
> > I tried a demo a few weeks ago.
> > It was a thing I put a lot of hope on, because it could be mixer (with
> > scenes) and midi controller in one: the looper's dream. (I
> > had not checked its recording power as audio pc interface). I
> > was a little disappointed enough to verify I couldn't
> > reproduce my mixing setting (6 auxes and 2 groups). So, I
> > wait for the next one. Btw, it seems Behringer (...) is about
> > to release a digital mixer
> > (www.ddx3216.com) that seems to be way more deep than the
> > event (if you are not interested in audio to pc)
> >
> > my best
> > luca
> >
> www.unguitar.com
>
> ----- Original Message -----
> From: "M. Steven Ginn" <sginn@airmail.net>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Tuesday, January 01, 2002 8:23 PM
> Subject: Event EZ Bus?
>
>
> > Has anyone here tried the Event EZ Bus as a solution for matrix
> > routing between all the looping and effects devices?  It seems that it
>
> > could be a nice centerpiece for a live looping rig.
> >
> > Thanks,
> > Steve
> >
> >
>