Re: Behringer/Repeater questions

["Clifford@BienAppraisers" <res0koq3@verizon.net>]

Yes- but CC are hogs in some cases-for example: takes two separate pedals
just to Reverse both ways where as a PC would only use 1.

I read in the Repeater manual last night that some manufacturers add 1
number to PC and that sometimes subtracting/adding 1 from what the manual
says can fix the issue- I wonder why they would do that?

Cliff

----- Original Message -----
From: "DaViD AuKeR" <DaVAuK@Hevanet.Com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Tuesday, January 08, 2002 7:30 AM
Subject: RE: Behringer/Repeater questions


> > 2: My friend brought his Behringer controller over- and the Rptr acted
as if it was using the old 1.0
> > OS as far as some program changes are concerned- worked fine using CC
but I re-installed OS 1.1 to
> > make sure and same problem- any ideas?
> ...
> > There seems to be a number of typos in the new manual...
>
> I found a lot of # errors in the PC column, but have been doing fine
> w/CC.
>
> I recently got the Behringer FCB1010 controller, and am having a great
> time with it.  It's my first experience w/midiboard.  The thing hummed a
> bit at first, but I think it was just nervous about my programming
> skills...it's much better now!  I'm including how I programmed a couple
> banks...much of this info was kindly given me by Alan, which helped .A
> LOT. (thanks, Alan)!  If any of you have additional suggestions
> (including any trick "two at one time" switches), it would be dug!
>
> bank 00:
>
> 01 record (cc86 value=127)
> 02 undo (cc89 value=127)
> 03 erase loop (cc108 value=123)
> 04 play (cc85 value=127)
> 05 stop (cc87 value=127)
> 06 track select 1/2 (cc90 value=127)
> 07 track select 3/4 (cc91 value=127)
> 08 loop select down (cc97 value=127)
> 09 loop select up (cc96 value=127)
> 10 multiply loop (cc102 value=127)
> On each preset I have the expression pedals configured as follows:
> ExpA track level 1/2 (cc110 values=0-127)
> ExpB track level 3/4 (cc111 values=0-127)
> =================================
> Bank 01:
>
> 01 record (cc86 value=127)
> 02 undo (cc89 value=127)
> 03 play (cc85 value=127)
> 04 stop (cc87 value=127)
> 05 fx insert (cc103 value=16 (fx on imput) (R ex ped fx not active? (cc
> 103 value 0-1))
> 06 track select 1 (cc80 value=127)
> 07 track select 2 (cc81 value=127)
> 08 track select3 (cc82 value=127)
> 09 track select4  (cc83 value=127)
> 10 reverse loop (cc84 value=127) (R ex ped cc 84 value 0-1)
>
> Bank 02:
> 01 Feedback (cc11 (R ex ped cc 84 value 0-127)
> ...
> > Until Electrix implements a midi pedal initiated fade function,
> > or visual cues as to where the "feedback" level is when controlled via
midi,
> > I'm perfectly happy with the 3 button footswitch and hands on
weakage.  -
>
> That would be nice.  Still, with the expression pedal, one can get
> fairly close to desired % feedback with practice (and sensitive
> Looper'sock)  It would be also great to Erase select tracks, and not
> just the whole loop (but whole loop erase is better than nothing!).
>
> David
>