[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Is there such a function as.....



Cliff -
no prob. You should hear the music I create with it! do the same, only
better than me, cause it'll be yours!
Pedro Felix  - NYC 2002
-----Original Message-----
From: Clifford@BienAppraisers <res0koq3@verizon.net>
To: Loopers-Delight@loopers-delight.com
<Loopers-Delight@loopers-delight.com>
Date: Monday, January 14, 2002 5:18 PM
Subject: Re: Is there such a function as.....


>That IS awesome. I use Insert=Rev all the time- and although I'm getting
>pretty swift at changing params on the fly this is a great shortcut/tool-
>Thanks for letting me in on it-
>
>Cliff
>
>----- Original Message -----
>From: "Pedro Felix" <PedroFelix@worldnet.att.net>
>To: <Loopers-Delight@loopers-delight.com>
>Sent: Monday, January 14, 2002 3:16 PM
>Subject: Re: Is there such a function as.....
>
>
>> Cliff -
>> Insert, normally does just that, an insert which is added to the loop,
>mid,
>> beginning or end point of said loop - subject to press of switch. When
>> having the Insert set to reverse function as I usually employ, hitting
>> Insert toggles back and forth from playing the loop in forward to
reverse.
>A
>> long press of Insert enables it to work as intended instead of going
>> straight to the reverse mode of operation. Thus, enabling another Insert
>> (additional stuff) into the loop. This way you don't have to do a
>parameter
>> change. Yeah, it's cool! Thanks Matthias, Kim, et al!
>> Not sure if it's in the manual, I can only attest from first foot usage.
>If
>> it's not in the manual it's a tip and you should use it well.
>> best regards, Pedro Felix - NYC 2002
>>
>> -----Original Message-----
>> From: Clifford@BienAppraisers <res0koq3@verizon.net>
>> To: Loopers-Delight@loopers-delight.com
>> <Loopers-Delight@loopers-delight.com>
>> Date: Monday, January 14, 2002 3:23 PM
>> Subject: Re: Is there such a function as.....
>>
>>
>> >What does long press of Insert do? How do you employ it? I'll check the
>> >manual later- Thanks.
>> >
>> >Cliff
>> >
>> >----- Original Message -----
>> >From: "Pedro Felix" <PedroFelix@worldnet.att.net>
>> >To: <Loopers-Delight@loopers-delight.com>
>> >Sent: Monday, January 14, 2002 7:45 AM
>> >Subject: Re: Is there such a function as.....
>> >
>> >
>> >> -----Original Message-----
>> >> From: Hedewa7@aol.com <Hedewa7@aol.com>
>> >> To: Loopers-Delight@loopers-delight.com
>> >> <Loopers-Delight@loopers-delight.com>
>> >> Date: Sunday, January 13, 2002 1:39 PM
>> >> Subject: Re: Is there such a function as.....
>> >> >DialaThos@aol.com writes:
>> >> >
>> >>
>> >> snipples -
>> >> >>have 2 seconds of silence after it.  Sort of an "extend loop"
>function.
>> >> >the kludgey workaround in repeater would be to 'multiply' by an
>integer,
>> >> then
>> >> >erase just the section(s) of audio what ya don't want..... sorta
>> >p.i.t.a.,
>> >> >really, and a bit touchy.
>> >> >very easy to do on edp, though..... just end a 'multiply' w/the
>> >> >'record'-function, where ya want the new loop-end to be, i think ---
>w/o
>> >> >playing anything into the unit.
>> >> >best,
>> >> >dt / splattercell
>> >> >
>> >> or if in reverse mode while overdubbing you can do a long press of 
>the
>> >> insert button and slur it in.
>> >> best regards, Pedro Felix - NYC 2002
>> >>
>> >
>>
>