[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: tap tempo to midi clock ???????



Many drum machines will do this: I tap a tempo on my ER-1 or Zoom drum
machines and as long as the midi chain is correctly connected, midi clock 
is
transmitted to each downstream device. By correctly connected, I mean that
each device is accessing the midi clock sent by the master. On my setup 
that
is:

drum machine to EDP IN
EDP midi through to RPTR in
RPTR midi through to MOFX, etc, etc

I think if the Repeater is the clock master it will do the same, not sure
about EDP



Neil Goldstein
Portland, Oregon

> -----Original Message-----
> From: Scott McGregor Moore [mailto:scott@dreamstate.to]
> Sent: Sunday, January 20, 2002 12:37 PM
> To: LD mailing list
> Subject: Re: tap tempo to midi clock ???????
>
>
> I haven't tried this but - could one not use an EDP in delay mode
> to tap the tempo and send out the MIDI clock?
> If so - you'd also get a free delay/looper!
>
> Cheers,
> Scott M2
>
> http://www.dreamSTATE.to
> ambientelectronicsoundscapes
> http://www.mp3.com/dreamSTATE
>
>
> ----- Original Message -----
> From: one less than none
> To: LD mailing list
> Sent: Saturday, 19 January, 2002 11:45 PM
> Subject: tap tempo to midi clock ???????
>
>
> HI
>     i am after a device that will allow me to synchronise all the
> device i have in my setup. i use
> several rackmount fx :eventide, quadreverb and soon [hopefully] a
>  fireworx, as all of these respond
> to midi clock i was wondering if there was a device that would
> allow me to tap in a tempo and
> convert it to midi clock so that all the delay times, modulation
> times etc etc would be synchronised
> to a global tempo.
>
> does anyone know of such a device ??
>
>
> David
>
> one less than none
> http://www.onelessthannone.co.uk
>