[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: tap tempo to midi clock ???????
but that still does not solve the problem of getting tap FROM the the
Drum Machine to a non midi device like the Vortex.
Mark
>Many drum machines will do this: I tap a tempo on my ER-1 or Zoom drum
>machines and as long as the midi chain is correctly connected, midi clock
>is
>transmitted to each downstream device. By correctly connected, I mean that
>each device is accessing the midi clock sent by the master. On my setup
>that
>is:
>
>drum machine to EDP IN
>EDP midi through to RPTR in
>RPTR midi through to MOFX, etc, etc
>
>I think if the Repeater is the clock master it will do the same, not sure
>about EDP
>
>
>
>Neil Goldstein
>Portland, Oregon
>
>> -----Original Message-----
>> From: Scott McGregor Moore [mailto:scott@dreamstate.to]
>> Sent: Sunday, January 20, 2002 12:37 PM
>> To: LD mailing list
>> Subject: Re: tap tempo to midi clock ???????
>>
>>
>> I haven't tried this but - could one not use an EDP in delay mode
>> to tap the tempo and send out the MIDI clock?
>> If so - you'd also get a free delay/looper!
>>
>> Cheers,
>> Scott M2
>>
>> http://www.dreamSTATE.to
>> ambientelectronicsoundscapes
>> http://www.mp3.com/dreamSTATE
>>
>>
>> ----- Original Message -----
>> From: one less than none
>> To: LD mailing list
>> Sent: Saturday, 19 January, 2002 11:45 PM
>> Subject: tap tempo to midi clock ???????
>>
>>
>> HI
>> i am after a device that will allow me to synchronise all the
>> device i have in my setup. i use
>> several rackmount fx :eventide, quadreverb and soon [hopefully] a
>> fireworx, as all of these respond
>> to midi clock i was wondering if there was a device that would
>> allow me to tap in a tempo and
>> convert it to midi clock so that all the delay times, modulation
>> times etc etc would be synchronised
>> to a global tempo.
>>
>> does anyone know of such a device ??
> >
> >
> > David
> >
> > one less than none
> > http://www.onelessthannone.co.uk
> >