RE: tap tempo to midi clock ???????

[Marklar <sine@zerocrossing.net>]

but that still does not solve the problem of getting tap FROM the the 
Drum Machine to a non midi device like the Vortex.

Mark

>Many drum machines will do this: I tap a tempo on my ER-1 or Zoom drum
>machines and as long as the midi chain is correctly connected, midi clock 
>is
>transmitted to each downstream device. By correctly connected, I mean that
>each device is accessing the midi clock sent by the master. On my setup 
>that
>is:
>
>drum machine to EDP IN
>EDP midi through to RPTR in
>RPTR midi through to MOFX, etc, etc
>
>I think if the Repeater is the clock master it will do the same, not sure
>about EDP
>
>
>
>Neil Goldstein
>Portland, Oregon
>
>>  -----Original Message-----
>>  From: Scott McGregor Moore [mailto:scott@dreamstate.to]
>>  Sent: Sunday, January 20, 2002 12:37 PM
>>  To: LD mailing list
>>  Subject: Re: tap tempo to midi clock ???????
>>
>>
>>  I haven't tried this but - could one not use an EDP in delay mode
>>  to tap the tempo and send out the MIDI clock?
>>  If so - you'd also get a free delay/looper!
>>
>>  Cheers,
>>  Scott M2
>>
>>  http://www.dreamSTATE.to
>>  ambientelectronicsoundscapes
>>  http://www.mp3.com/dreamSTATE
>>
>>
>>  ----- Original Message -----
>>  From: one less than none
>>  To: LD mailing list
>>  Sent: Saturday, 19 January, 2002 11:45 PM
>>  Subject: tap tempo to midi clock ???????
>>
>>
>>  HI
>>      i am after a device that will allow me to synchronise all the
>>  device i have in my setup. i use
>>  several rackmount fx :eventide, quadreverb and soon [hopefully] a
>>   fireworx, as all of these respond
>>  to midi clock i was wondering if there was a device that would
>>  allow me to tap in a tempo and
>>  convert it to midi clock so that all the delay times, modulation
>>  times etc etc would be synchronised
>>  to a global tempo.
>>
>>  does anyone know of such a device ??
>  >
>  >
>  > David
>  >
>  > one less than none
>  > http://www.onelessthannone.co.uk
>  >