[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: tap tempo to midi clock ???????



In true loop fashion, this particular piece of the equation comes back to a
discussion from long ago.  Mathias detailed the construction of a cord that
can run from an EDP "BeatSync" jack, into the tap temp jack of a Vortex,
which will cause the Vortex to slave it's clock to the EDP.

So, in Neil's setup, he could also slave the Vortex to the clock of the 
drum
machine (via the EDP).

Doug

P.S. - Search the archives for Vortex;cable to find the details on
construction.  I did it, and I'm a neophyte on electronics construction.
The effect is amazing.


----- Original Message -----
From: "Marklar" <sine@zerocrossing.net>
To: <Loopers-Delight@loopers-delight.com>
Sent: Sunday, January 20, 2002 7:58 PM
Subject: RE: tap tempo to midi clock ???????


> but that still does not solve the problem of getting tap FROM the the
> Drum Machine to a non midi device like the Vortex.
>
> Mark
>
> >Many drum machines will do this: I tap a tempo on my ER-1 or Zoom drum
> >machines and as long as the midi chain is correctly connected, midi 
>clock
is
> >transmitted to each downstream device. By correctly connected, I mean
that
> >each device is accessing the midi clock sent by the master. On my setup
that
> >is:
> >
> >drum machine to EDP IN
> >EDP midi through to RPTR in
> >RPTR midi through to MOFX, etc, etc
> >
> >I think if the Repeater is the clock master it will do the same, not 
>sure
> >about EDP
> >
> >
> >
> >Neil Goldstein
> >Portland, Oregon
> >
> >>  -----Original Message-----
> >>  From: Scott McGregor Moore [mailto:scott@dreamstate.to]
> >>  Sent: Sunday, January 20, 2002 12:37 PM
> >>  To: LD mailing list
> >>  Subject: Re: tap tempo to midi clock ???????
> >>
> >>
> >>  I haven't tried this but - could one not use an EDP in delay mode
> >>  to tap the tempo and send out the MIDI clock?
> >>  If so - you'd also get a free delay/looper!
> >>
> >>  Cheers,
> >>  Scott M2
> >>
> >>  http://www.dreamSTATE.to
> >>  ambientelectronicsoundscapes
> >>  http://www.mp3.com/dreamSTATE
> >>
> >>
> >>  ----- Original Message -----
> >>  From: one less than none
> >>  To: LD mailing list
> >>  Sent: Saturday, 19 January, 2002 11:45 PM
> >>  Subject: tap tempo to midi clock ???????
> >>
> >>
> >>  HI
> >>      i am after a device that will allow me to synchronise all the
> >>  device i have in my setup. i use
> >>  several rackmount fx :eventide, quadreverb and soon [hopefully] a
> >>   fireworx, as all of these respond
> >>  to midi clock i was wondering if there was a device that would
> >>  allow me to tap in a tempo and
> >>  convert it to midi clock so that all the delay times, modulation
> >>  times etc etc would be synchronised
> >>  to a global tempo.
> >>
> >>  does anyone know of such a device ??
> >  >
> >  >
> >  > David
> >  >
> >  > one less than none
> >  > http://www.onelessthannone.co.uk
> >  >
>