Re: EDP vs Repeater

["Om_Audio" <clifsound@mediaone.net>]

The EDP uses standard mono 1/4" cable- an A/B box should work fine- 
remember
if you are using 2 EDP linked for stereo you only need 1 foot controller- 
it
controls both at the same time-

As for moving loops from EDP to Repeater it is simple- my setup right now 
is
EDP right into Repeater- both are midi synced to various items- mostly a
Korg ES-1 tho- I just create loops on the EDP and record into Repeater
whenever- I recently made something cool by loading 4 diff loops in EDP and
recording them to Rptr as I scrolled through them in time with the midi
tempo- switchquant was off so scrolling through them you just get little
snippets- kind of like an arpeggiated analog synth depending on the sound 
of
the loops-

Cliff

----- Original Message -----
From: "Mark Hamburg" <mark_hamburg@baymoon.com>
To: "Looper's Delight" <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, January 23, 2002 5:17 PM
Subject: Re: EDP vs Repeater
>

> Question for the EDP experts: Can I readily set things up so that I could
> switch the EDP footpedal between controlling two EDP's? Could I do this
with
> a simple ABY box?
>
> Question for those with both an EDP and a Repeater: How easy is it to 
>move
a
> loop from the EDP onto the Repeater?
>