[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: FROZEN EDP (problem)



At 11:09 AM 1/27/2002, KkstrtChby@aol.com wrote:
>I have two EDP's.  Almost daily one of them in particular will FREEZE. I 
>found that I can reach back with the EDP OFF, I toggle the switch that 
>specifies European or US voltage ... and then turn it back on and it 
>works 
>fine for a while... (If i don't toggle the switch, it is frozen the same 
>as when I shut it off, when it turn it on again)
>
>What the heck is wrong with it?

sounds like some sort of hardware problem. maybe a broken solder joint or 
some loose connection in the power supply, but it's impossible to know for 
sure. Can't fix that with email, you need Gibson's repair dept.

kim



______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com