[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Balanced / unbalanced connections



-----Original Message-----
From: Stephen <dakshah@yahoo.com>

>Off Topic - Balanced / unbalanced connections
>Are there any issues with using a TRS (balanced) cable
>to connect an unbalanced out e.g. repeater, EDP
>(<--token looper content) to a balanced in, say, a
>patchbay?

Plugging a TRS plug into a TS output jack could put ground on the ring of 
the
cable.  The output doesn't care and neither does the patchbay.  But the 
input
that ultimately receives it might care if it expects a balanced signal.  
You
might notice volume loss, treble loss, increased hum, or combinations 
thereof.

>How about using a TRS cable to connect an unbalanced
>out to an unbalanced in?

My Behringer mixer is designed to do this as some outputs on some Mackies, 
IIRC.
But not all balanced outs are designed that way.  Consult your gear's 
manual.

Cheers,

Bill        billfox@fast.net           http://wdiyfm.org/programs/emusic
===============================================================================
Host of EMUSIC, an electronic, ambient, and space music show.  Thursdays at
11 pm on WDIY 88.1 FM, Allentown and Bethlehem and 93.9 FM in Easton and
Phillipsburg.  Email me if you wish to submit music for airplay 
consideration.
Radio Station Home Page: http://wdiyfm.org
Personal site: http://www.users.fast.net/~billfox
To subscribe to the EMUSIC on WDIY list, go to
http://groups.yahoo.com/group/emusic-wdiy and click on [Join This Group!]
SOUNDSCAPES Concert Series: http://www.tadream.net/soundscapes