kf, thanks for re-posting the below. burst, dt / splattercell >http://www.loopers-delight.com/tools/echoplex/FAQ6.html#Anchor-47383 > >If you are handy with a soldering iron you could probably do it yourself. > >Or better, if you are handy with an ohmmeter you could check whether the > >resistors in your unit match with what is described in the mod. Then you > >will know if you need to do the mod or not. Otherwise, you should contact > >Gibson's service department and get them to fix it. I believe Shane Radtke > >is the person you want for that. his contact info is on the LD site at >the >bottom of the echoplex section: >http://www.loopers-delight.com/tools/echoplex/echoplex.html